Zinc Ammonium chloride+ organic additives+ wetting agent




MSDS for Metaflux Chemi-725
PHYSICAL DATA:
Colour& Appearance                                                : Colourless to pale yellow crystal.
PH of 30% solution                                                   :  4 to 4.5
Composition:
Zinc Ammonium chloride+ organic additives+ wetting agent
Hazard Identification:

  • Hazard description:  Not Harmful
  • Information pertaining to particulars  dangers for man and environment:-
Harmful if swallowed.
  • Classification system
  • HMIS ratings (Scale 0-4)

  • Hazardous Materials identification system: OUR PRODUCT IS NON HAZARDOUS AND NON – INFLAMMABE IN NATURE.

First Aid Measure:

  • After inhalation
Supply fresh air.  If required, provide artificial respiration .  Keep patient warm.  Seek immediate medical advice.
  • After skin contact: Immediately wash with water and soap and rinse thoroughly .  Seek immediate medical advice.
  • After eye contact.
Rinse opened eye for several minutes under running water.  Then consult a doctor.
  • After swallowing seek immediate medical advice.

Fire Fighting measures:

  • Suitable extinguishing agents.
  • Special hazards caused by the material, its products of combustion or resulting gases.
  • In case of fire, the following can be released.
  • Protective equipment:
Wear self – contained respirator
Wear fully protective impervious suit.

Accident release measure:
  • Persons-related safety precaution:
Wear protective equipment.  Keep unprotected persons away.
Ensure adequate ventilation.
  • Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
  • Measures for cleaning / collecting:
Dispose contaminated material as waste according to item 13
  • Additional information
See section of 7 for information on safe handling
See section 8 for information on personal protection equipment
            See section 13 for disposal information.
Handling and Storage:
  • Handling
Information for handling:
Keep packing tightly sealed
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the work place.
  • Information about protection against explosions and fires:
Keep ignition sources away.
  • Storage
Requirements to be met by storerooms and receptacles.
No special requirements.
Information about storage in on common storage facility:
Store in the dark.
Store away from oxidizing agents.
  • Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Protect from exposure to light.





Exposure controls and personal protection:

  • Additional information about design of technical systems.
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Components with limit value that require monitoring at the work place:
Not required
Additional information: No  data
  • Personal protective equipment.
  • General protective and hygienic measures:
The usual precautionary measure for handling chemicals should be followed.  Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hand before breaks and at the end of work.
  • Breathing Equipment:
Use suitable respirator when high concentrations are present.
Protection of hands
Impervious gloves
Check protective gloves prior to each use for their proper condition.
Material of gloves.
The selection of suitable gloves not only depends on the material , but also on quality,  Quality will vary from manufacturer to manufacturer.
  • Eye protection: Safety glasses.

  • Body protection: Protective work clothing.

Stability and Reactivity
  • Thermal decomposition / conditions to be avoided
Decomposition will not occur if used and stored according to specifications.
  • Materials to be avoided
Light
Oxidising Agents
  • Dangerous reaction                 : Not known
Toxicological Information
                 
Primary irritant effect
·         On the skin: irritant to skin and mucous membranes
·         On the eye : Irritating effect
·         Sensitization : no sensitizing effects known
      .Mutagenic effects have been  observed on tests with laboratory animals
·         Sub-acute to chronic  toxicity
·         Sub-acute to chronic toxicity
  • Additional toxicological information
To the best of our knowledge the acute and chronic toxicity of this substance is not
Fully known.  No classification data on carcinogenic properties of this material is available from the EPA, IARC,OSHA  OR ACGIH
Ecological Information

General  Notes
Do not allow material to be released to the environment without proper governmental permits

Disposal Considerations
      Product
·         Recommendation
·         Consult  state, local or national regulations to ensure proper disposal
·         Unclean packaging
·         Recommendations
       Disposal must be made according to official regulations

Transport Informations
    
·         Not a hazardous material  for transportation
·         Dot regulations
·         Hazard class                                                :    None
·         Land transport ADR/RID  (cross border    :    None
·         ADR/RID class                                           :     None
·         Maritime transport IMDG
·         IMDG class                                                 :   None
·         Air transport ICAO-TI and IATA –DGR
·         ICAO /IATA class                                      :    None
·         Transport /Additional information
       Not dangerous according to the above specification

Regulations

  • Product related hazard informations.
  • Risk Phrases
  • Harmful if swallowed
  • Possible risk of irreversible effects
  • safety phrases : 36/37 wear suitable protective clothing  and gloves
  • Information about limitation of use
  • For use only by technically qualified individuals
     
 Other  Information
Employers should use this information only as supplement to other information gathered by them, and should make Independent judgment of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with This material safety data sheet, or in combination with any other product or  process,  is the responsibility of the user
·         Department issuing MSDS :  Lab, Health Safety and environmental department





Comments

Popular posts from this blog

Nickel Based Flux

إستهلاك مدخلات الجلفنة