Pickling Acid Recovery



Pickling Acid Recovery 


The flowchart shows the continuous treatment of  pickling tank to keep iron content around 40 gr /lit , and concentration of  HCl 10% wt/wt   .These parameters will minimize pickling time and give constant quantities  of acid and iron salts which move to rinsing water.

In this case, it easy to design the capacity of rinsing water treatment unit ,

 



Comments

Post a Comment

Popular posts from this blog

Treatment and Utilization of Spent Acid that Used in Galvanizing ( Pickling )

Image
                                                                         1-        6 HCl + Fe 2 O 3 ----- 2 FeCl 3 + 3 H 2 O  2-             Fe + HCl  -------- Fe Cl 2 + H 2   The main concentration of pickling tank is 16% wt/ wt . The performance of the tank can't be effective when it reaches 5  wt/ wt . At this point the iron content is 150 gr / lit . it means you have  ore or iron mine . There is more than one option to treat this consumed acid : ·         Acid Regeneration : it can be used on or off line by using special type of resins in order to get rid of iron then concentrate  it to reach crystal stage as FeCl 3 and it is necessary to keep Fe content within 10 gr/ lit to reduce dipping time in pickling or acid tank . the second option to treat the consumed acid off line by evaporation or treat it with sulfuric acid as below 3 H 2 SO 4 + 2 FeCl 3 ------ 6 HCl +   Fe 2 ( SO 4 ) 3   H 2 SO 4 +  FeCl 2 ------  2 HCl +   Fe SO 4 The value of ferric sulfa
Read more

Critical Factors of Choosing the Metal for Galvaning

Image
     There are two factors to be considered : 1 - The iron for galvanizing is a product and not galvanized for the purpose of maintenance. 2- If the option to choose the metal exists, it is desirable to choose iron  that gives us a high quality product within the basic criteria, including: 1- The chemical composition of the metal, especially the content of silicon, carbon and phosphorous .... etc . 2- The surface must be free of organic pollutants (dyes, paints, polymers, bitumen). 3-   No  high corrosion or  pores in the metal surfaces . 4- The thickness of the iron should be consistent and  no significant differences. 5- The design  of products should allow draining of molten zinc.
Read more

Galvanizing Material

Image
      A-       degreasant   1-    Degreasing: It is  used to remove organic substances or contamination   , the concentration of this material usually  10% wt/wt from tap water  2-    Actually 7.5% has been used in decreasing tank the, the process take place without problem in production 3-    The temperature of the tank is  75 c, there are neutral , alkaline and acidic degreaser .  4-    The dipping time is the same . 5 -    The method of check the concentration is necessary  to improve performance  and to  control .     B- pickling additive   1-     This additive is used as: a- inhibitor agent b- wetting gent c- anti – vaporization agent 2-     1.4% of the concentrated acid is added to the pickling tank from the pickling additive   3-     The use of the pickling additive has taken place with out any problems 4-  they are  harm ful    in case of producing new substances from consumed acid , and same for water treatment ( almost contain heavy  metals  and
Read more